NVIDIA GeForce GTX 1070 SLI (Desktop) vs NVIDIA GeForce GTX 1070 (Desktop) vs NVIDIA GeForce GT 1030 (Desktop)

NVIDIA GeForce GTX 1070 SLI (Desktop)

The Nvidia GeForce GTX 1070 SLI for desktops is a combination of two GTX 1070 graphics cards in SLI mode. Each card renders one frame at a time (AFR mode) but depends for most games on a good profile in the driver. Therefore, the performance can range from no gains over a single GTX 1070 to up to 90% faster performance. In most games with SLI support, the GTX 1070 SLI is therefore faster than a single GTX 1080. However, sometimes the combination also suffers from micro-stuttering.

The technical details of the card are identical to a single GTX 1070 (see for more information) and the power consumption is doubled (2x 150 = 300 Watt).

NVIDIA GeForce GTX 1070 (Desktop)

The Nvidia GeForce GTX 1070 is the second fastest Pascal based graphics card in mid May 2016. It is a high-end desktop graphics card. The mobile pendant is also called GeForce GTX 1070, but features more shaders and a lower core clock (see this page for details on the laptop version of the GTX 1070). Both cards are based on a cut down GP104 chip as the GTX 1080 and manufactured in 16 nm FinFET at TSMC. More details on the Pascal architecture including all features and comparisons to Maxwell, can be found here.

Compared to the GTX1080, the GTX1070 features less CUDA cores (1920 versus 2560) that are clocked a bit lower (maximum Boost 1683 versus 1733). Instead of the new GDDR5X, the GTX 1070 uses slower GDDR5 graphics memory - but still 8 GB. The TDP is also reduced from 180 Watt to 150 Watt.

The performance of the GTX 1070 is between the old GTX 980 Ti and the GTX 1080. Therefore, gaming in 4k at high details is possible with the card and also VR gaming is possible.

NVIDIA GeForce GT 1030 (Desktop)

The Nvidia GeForce GT 1030 (sometime GTX 1030 called) is an entry level dedicated graphics card for desktops. It is based on the GP108 chip using the Pascal architecture in 14nm FinFET. It features three streaming multiprocessors (SMs) and therefore 384 shader cores, 24 texture units and 16 ROPs. The 2 GB GDDR5 memory are connected with two 32 Bit memory controller (48 GBit/s). The shaders are identical to other Pascal cards like the GTX 1050 and therefore also the support for DirectX 12 FL 12_1.

The performance is slightly below the Radeon RX 550 from AMD and therefore only suited for low to medium detail settings of modern games like Battlefield 1.

The TDP of the GT1030 is specified as 30 Watt.